HRGL · Slim Driver with DIP Switch
HRGL is a slim DIP-switch driver with 24V output at 100–600W, designed for high-power linear lighting in confined ceiling voids.

Technical specifications
| Series code | HRGL |
| Input voltage | 170-260 / 170-264VAC |
| Output voltage | 24V |
| Power range | 100–600W |
| IP rating | IP20 |
| Dimming method | ON-OFF |
| Models | HRGL-100/150/200/300/400/500/600-24 · 7 models |
| Catalog page | P10 |
| Warranty | 3-year warranty (subject to purchase contract) |
Key features
- Ultra-slim housing saves installation space
- DIP switch settings for fast on-site commissioning
- 100–600W high-power range
- 24V constant-voltage output
Model numbering
The catalog uses a consistent SERIES-WATTAGE-OUTPUT pattern, e.g. HRS-200-24 means the HRS series, 200W, 24V output; HRC-32-42 means HRC constant-current 32W, 42V; HRGL-100/150/200/300/400/500/600-24 follows the same rule — the trailing 12 / 24 / 48 is the output voltage. Confirm output voltage, power headroom (≤80% loading recommended) and IP rating before fixing the model — see power headroom and voltage-drop engineering.
Typical applications
High-power linear lighting, commercial LED strips, recessed ceiling installation, exhibition lighting
For scenario-wide selection see the six solutions, or contact an engineer with your wattage, output voltage, dimming protocol and IP rating.
Frequently asked questions
What is the HRGL series?
HRGL is a slim DIP-switch driver with 24V output at 100–600W, designed for high-power linear lighting in confined ceiling voids.
Which models are available in HRGL?
Catalogue page P10 lists 7 individual models spanning 100–600W with 24V outputs; the rule is SERIES-WATTAGE-OUTPUT. High-wattage versions may be 24V only — follow the catalogue listing and the matching datasheet.
What are the IP rating and input voltage of HRGL?
Protection rating IP20, input voltage 170-260 / 170-264VAC, output 24V.
Where is HRGL typically used?
High-power linear lighting, commercial LED strips, recessed ceiling installation, exhibition lighting.
What do HUARON products cost, and how can I get a quotation?
HUARON drivers are project-based products. Formal quotations are issued by our engineers against the exact model, quantity, required approvals, lead time and delivery terms; quotations are issued per project and online checkout is not offered. Send the model and quantity by mobile / WeChat +86 18123724123 or email XXR742915@163.com; the quotation states the applicable configuration, currency, tax treatment and validity.
HRGL — Complete Model List
Every model as listed individually in the product catalogue, ready for selection and enquiries.
Model rule: series - power step - output suffix. The 7 models below are listed individually on catalogue page P10, not generated by mechanically combining wattage and voltage.
| Output | Catalogue-listed models |
|---|---|
| 24V constant voltage | HRGL-100-24HRGL-150-24HRGL-200-24HRGL-300-24HRGL-400-24HRGL-500-24HRGL-600-24 |
Six things to confirm before enquiring
Provide these together and our engineers can match the exact model and send the matching datasheet straight away.
- Output voltage
Confirm 12V / 24V / 48V constant-voltage or 30–42V constant-current. The two are not interchangeable.
Read the guide › - Power and headroom
Select one step above total luminaire load; keep loading at or below 80% and check temperature derating.
Read the guide › - IP rating
IP20 for dry indoor use; IP67 for outdoor, damp or wash-down areas, with matched cable glands.
Read the guide › - Dimming protocol
Identify the controller protocol: TRIAC, 0-10V, DALI DT6/DT8, or non-dimmable.
Read the guide › - Mains and region
Check local mains range (100-130 / 170-264VAC or 120-277VAC).
Read the guide › - Compliance documents
Confirm required approvals for the destination market and request certificate numbers plus current datasheets.
Read the guide ›
Technical documents available
| Chinese / English datasheet | Issued per exact model, including electrical data, wiring and derating |
| Product certificates | CCC / CE / RoHS / UKCA / FCC / ETL / CB / BIS / SAA as applicable |
| Selection and wiring guide | Chinese and English installation notes with wiring diagrams |
| Label and packing information | Label markings, packing method and carton specification, supplied per order |
Technical documents are supplied by our engineers against the exact model so that the latest revision is used; they are not distributed as public downloads.
Pricing · quotation per project
These are project-based LED drivers. Pricing depends on the exact model, quantity, required approvals and lead time; formal quotations are issued by our engineers per project. Online checkout is not offered. Share the model and quantity to receive a quotation stating configuration, currency, tax treatment and validity.
Request a quotation